4 Inch Submersible Water Pump JSP4/2 Submersible Electric Pump

4 Inch Submersible Water Pump JSP4/2 Submersible Electric Pump

Identification Code 
eg: JSP4/2-6(S) 
JSP: Pump Name 
4 : Well dia 4" 
2 : Capacity(m3/h) 
6 : Impeller’s Number 
S : Single Phase

Applications :

For water supply from wells or reservoirs. 
For domestic use, for civil and industrial applications. 
for garden use and irrigation.

Operating conditions :
Maximum fluid temperature up to +50 C
Maximum sand content:0.25%
Maximum immersion depth: 80m.
Minimum well diameter:4”

Motor :
Rewind able motor
Full obturated screen motor
Three-phase: 380V-415V/50Hz 
Single-phase: 220V-240V/50Hz
Equip with special start-up control box

Internal diameter of outlet:
1.25” 1.5”

Special features available
Other voltages. 
Frequency 60Hz. 
Other mechanical seal. 
Equip with Auto-control box.

Warranty:2 year 
(according to our general sales conditions).

Material:

1, Delivery casing: AISI304ss or AISI316ss
2, Check valve:AISI304ss or AISI316ss
3, Suction lantern: AISI304ss or AISI316ss
4, Diffuser: AISI304ss or AISI316ss
5, Impeller : AISI304ss or AISI316ss
6, Shaft : AISI316ss or AISI304ss
7, Shaft coupling: AISI316ss or AISI304ss
8, Wear ring: Rubber
9, Motor external casing: AISI304ss 
10, Top cover: Cast-iron G20 UNI5007 or AISI304ss
11, Bottom support: Cast-iron G20 UNI5007 or AISI304ss
12, Mechanical seal: NBR or Carbon -SIC/TC
13, Shaft: AISI304ss-C1045
14: Thrust Bearing : NSK (Japan) or Ceramic/Carbon
15: Radial Bearing : NSK (Japan) or Ceramic/TC